Some Controls in this Controls window are the same as Controls in the Clipboard. Do you want to replace them with the ones in the Clipboard?
Note: You will not be able to Undo this operation.[.KC-520.]
Some of the Controls you are dragging are the same as Controls in the destination window. Do you want to replace the Controls in the destination window?
Note: You will not be able to Undo this operation.[.KC-510.]
KeyConfigure will not be able to Undo this operation, because it can not find enough memory. (Controls that are Cut may still be Pasted from the Clipboard.)[.KC-500.]
This operation could not be completed because KeyConfigure could not create a copy of “^1” on the disk named “^2”.[.KC-480.]
KeyConfigure could not create a copy of “^1” because the disk named “^2” is full. An additional ^3 of free space are needed in order to complete this operation.[.KC-470.]
KeyConfigure could not create a copy of “^1” because the disk named “^2” is locked. Please unlock this disk and try again.[.KC-460.]
KeyConfigure can not uninstall the key from this application. Check that you have disabled any virus protection programs you may have installed.[.KC-450.]
KeyConfigure can not install a key into this application. Check that you have disabled any virus protection programs you may have installed, and re-key the application.[.KC-440.]
This program is known to check itself for virus infection. For this reason, it is recommended that you use the Zero Footprint option when keying this program. You have not chosen Zero Footprint.[.KC-438.]
KeyConfigure can not install a key into this program, due to a Resource Manager error. Try running under System 6.0 if you are currently running System 7.[.KC-435.]
KeyConfigure can not install a key into this program because the resource fork is corrupted. Try installing on a copy of the original program, or on a different disk.[.KC-433.]
KeyServer did not respond so this Control was not modified. Verify your KeyConfigure session by Disconnecting and then Reconnecting to the KeyServer.[.KC-430.]
The key for “^1” can’t be installed.[.KC-445.]
You cannot remove a Control from the Active Controls window while that Control is in use. Please wait until all users have quit from the controlled program, and then remove the Control.[.KC-375.]
The frontmost Controls window already contains a Control for this application. KeyConfigure will key this application and use the old, existing Control.[.KC-370.]
The KeyServer does not have enough memory to activate some of the Controls. The KeyServer is working normally, but you will need to restart the KeyServer machine in order to activate these Controls.[.KC-360.]
The KeyServer does not have enough memory to complete this operation. The KeyServer is working normally, but you will need to restart the KeyServer machine in order to add more Controls.[.KC-350.]
Information about the application you are trying to key could not be obtained, so the keying process has been aborted. Try keying a different copy of the application.[.KC-340.]
There was an error while installing the Control into the KeyServer file. This could be due to a locked or full disk, or the KeyServer file may be damaged. Restart the KeyServer machine and re-Install.[.KC-330.]
KeyConfigure is running short on memory, so this uninstall has failed. If you are running under MultiFinder, increase the amount of memory allocated to KeyConfigure in the Get Info box and restart.[.KC-300.]
KeyConfigure is running short on memory, so this install has failed. If you are running under MultiFinder, increase the amount of memory allocated to KeyConfigure in the Get Info box and restart.[.KC-290.]
The Control for that program is not in the frontmost window. Locate a Controls file that contains the proper Control and select uninstall again.[.KC-280.]
